The Delightful System
Key Benefits
Easy to change
No tools necessary for changing or removing
Very versatile ( Can be used with Austrians, Balloons, Romans, Clouds and many many more)
Installation Instructions
* Click on thumbnails to see larger pictures.
1.Mount the channel using mounting brackets shown to right.
A. There is a left and a right side mounting bracket.
B. The brackets can be mounted in almost any configuration
inside or outside the window.
channelresized.jpg (15691 bytes)
2. Slide the channel into the brackets that were mounted in 1 with opening
to bottom.
3. Close brackets securing channel.
stringingresized.jpg (20248 bytes)
4. Set window treatment on a table with grid parallel to the top.
5. String cord starting from either the right or left depending on which
side you want to draw the window treatment from when installed.
6. Leave enough cord length for drawing the window treatment then thread
up through the hole closest to the edge.
7. Next go across the top surface of the grid to a hole close to a column of
cord loops on the window treatment.
8. Thread down through the hole and cord loops on the window treatment.
9. Repeat for each column of loops on the window treatment. This will leave a bundle of cords on one side.
cordstopresized.jpg (20021 bytes)
10. Install cord stops at the bottom ends of each cord on window treatment.
11. Install one cord stop on the bundle of cords to be used for drawing the
window treatment.
carryingresized.jpg (16458 bytes)
12. Pickup the grid with attached curtain as shown and carry to window.
gridinsertresized.jpg (19912 bytes)
13. Tilt grid into channel with cords lying on top.
14. Push up into channel and jiggle into place resting on channel flanges.
installedresized.jpg (22579 bytes)
15. Install industrial hook and loop on front of channel.
16. Attach window treatment, that should have the opposite hook and loop sewn onto the top of it, to channel.
pullcordresized.jpg (34162 bytes)
17. Adjust cord stop, as shown at left, for window treatment height or use window cleats.
18. If desired a loop can be made with bottom cord stops to hold a rod for weight.
19. If you have questions please contact Visions By Two Sisters Inc. at:
![[Company Logo Image]](images/logo.gif){kind=logo}
Visions By Two Sisters Inc. 
